Pip Wizardry 2020

Pip Wizardry 2020!

Hello Wizards, this is Nathan Shadowbringer here to help you calculate the actual damage of spells per pip!
 
This article will be updated if spell changes happen down the line. Eventually, I plan for this list to include even Loremaster and crafted spells.
 
We will start with the highest Pip spells, and works our way down to the lowest ones. You will notice some of the spells are not a whole number. Why is that, you ask? Currently, Shadow-enhanced spells that use Shadow and standard Pips – have been changing. In the summer 2020 Test Realm, KI has confirmed that one Shadow Pip now equals 3.6 pips. This number is subject to change. 
 
Before the 2020 Summer Update, Shadow enhanced spells had severe damage compared to non-shadow-enhanced spells. These spells went through changes to balance them. Shadow Pips previously never had an absolute value, but now they do thanks to the new spell changes! They are still powerful, but now within reason to normal spells of a similar rank.
 

Calculating Damage Per Pip

First, if the spell has a damage range, we must find the average damage. For example, let’s take the spell Storm Owl. Storm Owl is a ten Pip spell, that can do anywhere between 1330 – 1470 damage. Which, on average, is about 1400. I would divide 1400 by 10 to get the spell’s loss per Pip or DPP. Storm Owl would come out to be 140 DPP.
 

This can be represented by the formula: (damage)/(x-y). 

Here you would take the spell’s average damage (based upon the values on the card), and divide it by the difference of its Pip cost (represented by the letter x) and its utility Pip cost (represented by the letter y) which we’ll get to in a moment.

So the math for Storm Owl would look like this:

(damage)/(x-y)

(1400)/(10-0) 

1400/10

= 140 

It seems simple, right? Not always. To get a spell’s true DPP, we have to factor in Pip reductions, and damage multipliers.

What Are Pip Reductions?

A Pip reduction is something factored into a spell’s DPP calculation. These reductions happen when a spell has an added effect or utility attached to it. When calculating DPP, some Pips may get subtracted. 

For example, one type of Pip reduction is the scion condition. Scion spells cost 11 pips, and do x2 damage if a particular condition is met depending on the spell. Because Scion spells can do x2 damage, reducing their initial damage. Their base damage is around the damage of a ten Pip spell. See where I’m going with this? 

The Scion Condition results in -1 Pip when calculating damage per pip. Yet, the Scion condition is not the only Pip reduction. There are, in fact, many more. 

Types of Pip Reduction

The following list contains the types of Pip reductions along with how many Pips they reduce.

  • Special: 10% Pierce blade: -0 Pips
  • Rusulka’s Wrath blade/weakness: -0.5 Pips
  • 800 Absorb: -1 Pip
  • Disarm: -1 Pip
  • Guiding Light: -1 Pip
  • Infection: -1 Pip
  • Pierce: -1 Pip
  • Remove 2 pips: -1 Pip
  • Scion Condition: -1 Pip
  • Steal 1 pip: -1 Pip
  • Stun: -1 Pip
  • Summon minion: -1 Pip
  • Trap: -1 Pip
  • Tower shield: -1 Pip
  • Bubble change: -2 Pips
  • Double Disarm: -2 Pips
  • Double stun: -2 Pips
  • Gain 1 pip: -2 Pips
  • Plague: -2 Pips
  • Pierce before hit: -2 Pips
  • Smokescreen (40% accuracy debuff to all enemies): -2 Pips
  • Spirit Shield + Elemental Shield: -2 Pips
  • Stun all: -2 Pips
  • 45% Weakness: -2 Pips
  • AOE 45% Weakness -3 Pips

What This Means

These Pip reductions may NOT all be accurate, because determining the number of Pips a utility takes away is tricky. KI developer Mattnetic has said some utilities may cost less and others more. The issue is finding out which ones. Most pip reductions appear to be -1 one Pip, with AOE utilities such as Plague counting as -2. One for the utility, and one for the AOE effect. However, that still leave some loose ends, so allow me to to tie those up right now.

Because all King Artorius spells to get a 10% Pierce charm, the Pierce charm is not counted as a utility. Thus, every King Artorius spell gets it for free.

Rusalka’s Wrath gives either a 30% storm blade or a 30% Storm Weakness to the caster. Considering it has a chance to positively and negatively affect the caster, it was given 0.5 pips instead of 1.

Because the typical bubble would cost two pips, the Pip reduction is counted as two Pips.

Calculating the Pip reduction for an 800 Absorb was difficult. The actual Absorb spell is three pips for a 400 Absorb; therefore, wouldn’t it be counted as six Pips for an 800 Absorb? If so, then the DPP of Hungry Caterpillar would be extremely high. But that wouldn’t be, right? Would it? These things can be quite challenging. 

What Are Damage Multipliers?

You factor in a damage multiplier after you calculate a Pip reduction. For example, a standard damage multiplier is an AOE, or area of effect. An AOE spell is when a spell hits all enemies. Let’s take the spell, Glowbug Squall. This spell is an AOE, and it does 940 damage to all enemies. It costs five regular Pips and one shadow Pip. A Shadow Pip currently equals 3.6 Pips; therefore, Glowbug Squall would be 8.6 Pips in total.

AOE spells have their damage multiplied by 0.75, or 3/4. To account for this spell being an AOE, we get the inverse of 3/4 and multiply by 4/3. Instead of dividing 940 by 8.6, we would multiply 940 by 4/3 first to get 1253.3. Now, we divide by 8.6. Finally, this makes the DPP of the spell Glowbug Squall 145.7.

 

Calculating Drain DPP

Calculating the damage multiplier for drains was difficult. Thanks to the new spell, Ship of Fools, we can now figure it. Ship of Fools has two routes you can go and upgrade using spellements. One is damage, and the other is a drain.
 
We can now accurately compare drain damage to typical damage. For example, the final tier of Ship of Fools. We found drains to suffer a 0.88% damage dropoff compared to pure damage. The final drain tier for Ship of Fools deals 330 damage. The final pure damage tier for ship of fools deals 375 damage. 330/375 is 22/25, 0.88, or 88%. 
 
This rate stays consistent for each upgrade of Ship of Fools. Therefore, before we calculate a drain spell’s DPP, we have to multiply its damage by the inverse of 22/25, which would be 25/22, to find the true DPP.
 

Calculating DOT DPP

One more type of damage multiplier is “damage over time” or DOT. These spells have initial damage, and then the damage dealt over three rounds. Because this damage takes longer to deal, the damage is 25% higher than the average spell—DOT’s damage multiplies by 1.25. So, to find DPP of spells with DOT’s divide by 1.25 to get the final DPP value. 

X rank spells like Tempest and Snowball Barrage are not affected by the AOE multiplier. Because they already have their damage per Pip value listed on the card.

What do the Devs say?

The first chart here is from Ratbeard’s Dev Dairy, it shows the individual base DPP for each school of magic. In addition to the new and old DPP for each school’s Shadow-enhanced spells. 

With the damage per pip chart below, you will start to notice things with some spells above rank 7. The damage per pip curve caps off at eight Pips. It does not increase further. To account for this, rank eight spells and above get utility for cheaper then what a rank seven or lower would. They get these utilities at a 50% discount, compared to a rank seven or below spell. 

There is one utility that does not get this discount, the Scion Condition, which remains at -1 Pip, not -0.5. The discounted utilities are bolded on the chart.

Another thing to note is rank seven spells DO NOT get penalized for being an AOE. They are purposefully over the damage curve. None of the things mentioned above apply to Shadow enhanced spells.

Formulas: (x = number of Pips and y = utility Pip cost)

AOE: [(damage)(4/3)] / (x – y)

DOT: [(damage)(0.8)] / (x – y)

Drain: [(damage)(25/22)] / (x – y)

If you’re interested in learning more about DPP you can check out Ratbeard’s Dev Dairy on the subject with this link! https://www.wizard101.com/game/dev-diary/spell-balance-audit

Final Notes

Moving forward the it’s important to keep this information in mind:

  • One Shadow Pip equals 3.6 pips
  • Storm base DPP is 125
  • Fire base DPP is 100
  • Myth base DPP is 90
  • Death and Balance base DPP is 85
  • Life and Ice base DPP is 83
  • DOTs have a damage multiplier of 1.25
  • Rank 7 spells are intentionally above the curve in DPP (no x4/3 AOE multiplier when calculating DPP)
  • DPP scales slowly as spells start to cost more Pips
  • Shadow enhanced spells have a higher DPP compared to regular spells.

We hope this article helps you to understand the logic behind the recent changes to the game and how they will help balance things going forward. Personally, I am excited to see what new spells will be possible now.

Thanks For Reading!

Special thanks to Shawn Fire and Dustin from the Ravenwood Community Discord for assisting me in the many calculations throughout this article. I would also like to thank KI developer Ratbeard for responding to my questions about DPP so quickly, he was extremely helpful! And, thank all of you for reading. I hope you enjoyed this article as much as I did writing it. If you did, please check out the other guides and information Ravenwood Academy has to offer. Let us know what you think and what your calculations find in the comments below, or at the Ravenwood Community!!